We couldn’t believe we were still working on the same jobs – cleaning the glue off the frame, rust removal and taking the seat rails out. Check out our previous blogs for day 12, 13 and 14 if you want to see how we did this. After much trial and error we found a good… Continue reading Bus Demolition Day 16: We Are Going Back to LA!
Bus Demolition Day 15: A Place to Park Our Bus
We had to start to think of what we needed for our build now that the demolition is coming to an end. One of the things we were concerned about was that the ground we are currently parked on is not level. It’s going to be important to be on level ground during our build… Continue reading Bus Demolition Day 15: A Place to Park Our Bus
Bus Demolition Day 14: Sparks Fly!!! Seat Rail Removed
With the wooden floorboards and the glue removed, next up we needed to take out the seat rails to create a level surface for our new floorboards. These rails were put in to attach the passenger seats down to the floor, but serve us no purpose. The rails are welded down about every 6 inches.… Continue reading Bus Demolition Day 14: Sparks Fly!!! Seat Rail Removed
Bus Demolition Day 13: Live Edge Countertop and Even More Glue Removal!
The citristrip definitely helped to make the glue removal easier along with our friend the Multi Tool, but spending time on our knees bending over is hard on our lower backs so we can only do so much before we need to take a break. Lucky for us we live in a beautiful forest, so… Continue reading Bus Demolition Day 13: Live Edge Countertop and Even More Glue Removal!
Bus Demolition Day 12: Glue Removal and We Bought Our Flooring!
The previous day Don had painted Citristrip on top of the glue on the metal frame of the floor of the bus. With the use of the Multi tool we were able to get the glue off much quicker! So we went ahead and painted the rest of the glue with the Citristrip. We had to… Continue reading Bus Demolition Day 12: Glue Removal and We Bought Our Flooring!
Bus Demolition Day 11: If All Else Fails……Clean!
Before we can start putting down our new floor, we need to prep the metal frame. There is glue still stuck on the frame from the original floorboards we took out. We want to remove all the glue to have a clean and level surface to lay down our new plywood floors. Ugh, this was not… Continue reading Bus Demolition Day 11: If All Else Fails……Clean!